Fits 1969 Chevrolet Camaro & Pontiac Firebird with V8 engine. 2.50 inch Stainless Steel - Aggressive to moderate sound
This American Thunder® exhaust system comes as a complete true dual Crossmember-Back exhaust for your 1969 Chevrolet Camaro or Pontiac Firebird with V8 engine. These dual systems feature 2.50-inch mandrel-bent stainless steel tubing for maximum performance, includes a built-in H-pipe/balance tube flowing into a pair of Super 44® mufflers that deliver a moderate to aggressive interior and exterior tone and are suited to the enthusiast who wants their performance to be heard. The 2.50-inch tailpipes exit straight out under the rear bumper and are finished off with 2.50-inch angle-cut brushed stainless steel tips and includes all hangers and necessary hardware for installation. Like all Flowmaster® systems, the benefits include improved throttle response, power and mileage and is covered by our Lifetime Limited Warranty. To fit Convertible models without modification to the factory X-brace. You will need to shim the brace with 3/8-inch of spacers, or replace the factory X-brace with Hotchkis Suspension part# 1404 X-brace.
- Stainless Steel Exhaust Tips Exit in the Factory Location
- H-pipe Crossover for Maximum Power and Deep Tone
- Super 44 Series Mufflers for Deep Powerful Sound
- Includes Hangers and Hardware for Installation
- Mandrel-bent 16-gauge Stainless Steel Tubing
- Moderate to Aggressive Exterior Exhaust Tone
- Crossmember-Back True Dual Exhaust System
- Does Not Include Header Reducers or Factory Manifold Downpipes
- Lifetime Limited Warranty
Information:
Convertible models require an aftermarket X-brace like Hotchkis Performance part 1404 or 3/8-inch shims to stock X-brace for clearance.
Application Summary:
| Year |
Make/Model |
| 1969 |
Chevrolet Camaro |
| 1969 |
Pontiac Firebird |
| Attributes |
| 2WD/4WD |
2WD |
| ASIN |
B004HIO3DG |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Mandrel bent 16 gauge stainless steel tubing |
| Bullet Point #2 |
Moderate to Aggressive Sound Exterior Exhaust Tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Header-back System |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| CARB (California) Compliant |
Yes |
| Catalytic Converter Included |
No |
| Catalytic Converter Quantity |
Not Included |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band, Flat Band |
| Clamps Included |
Yes, Yes |
| Country of Origin (Primary) |
US |
| Drive |
2WD, 2WD |
| Emission Code |
3, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Exhaust Tip Diameter |
2.50, 2.50 |
| Exhaust Tip Finish |
Polished, Polished |
| Exhaust Tip Material |
304 Stainless Steel, 304 Stainless Steel |
| Exhaust Tip Quantity |
Sold Separately, 2 |
| Exhaust Type |
Dual |
| Exit Position |
Dual Rear, Dual Out Rear |
| Exit Style |
Straight |
| Finish |
Natural, Natural |
| Gasket Or Seal Included |
No, No |
| Grade Type |
Performance, Performance |
| Hangers Included |
Yes, Yes |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No |
| Heat Shield Attached |
No |
| Heat Shield Included |
No, No |
| Inlet Diameter |
2.500 in., 2.50 |
| Inlet Diameter (in) |
2.5 |
| Inlet Inside Diameter |
N/A |
| Inlet Inside Diameter (in.) |
N/A |
| Inlet Size (in.) |
N/A |
| Inlet Type |
Weld-On, Weld-On |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
2-1/2 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Mounting Bracket Included |
Yes, Yes |
| Muffler Body Height |
4.00 |
| Muffler Body Length |
13.00, 13.00 |
| Muffler Body Material |
409 Stainless Steel, 409 Stainless Steel |
| Muffler Body Shape |
Oval, Oval |
| Muffler Body Width |
9.50 |
| Muffler Count |
2 |
| Muffler Flanged Inlet |
No, No |
| Muffler Flanged Outlet |
No, No |
| Muffler Included |
Yes |
| Muffler Inlet Inside Diameter |
2.50, 2.50 |
| Muffler Inlet Outside Diameter |
2.63, 2.63 |
| Muffler Outlet Quantity |
1, 1 |
| Muffler Part Number |
842546, 842546 |
| Muffler Quantity |
2, 2 |
| Muffler Series |
Super 44 Series, Super 44 Series |
| Muffler Type |
Chambered, Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.50 |
| Outlet Diameter (in) |
2.5 |
| Outlet Outside Diameter |
2.500 in. |
| Outlet Outside Diameter (in.) |
2.5 |
| Outlet Size (in.) |
2.5 |
| part type |
Exhaust System Kit, Exhaust System |
| Pipe Color |
Silver, Silver |
| Pipe Material |
409 Stainless Steel, 409 Stainless Steel |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Single Dual |
Dual |
| Single or Dual |
Dual |
| Sound Level |
Moderate/Aggressive, Aggressive / Moderate |
| Spring Bolt Kit Included |
No, No |
| Sub Category |
Exhaust and Tail Pipes, Exhaust and Tail Pipes |
| Subcategory |
Complete Exhaust Kits |
| System Type |
Header Back, Crossmember-back |
| Tail Pipe Diameter |
2.500 in. |
| Tail Pipe Outlet Outside Diameter |
2.50, 2.50 |
| Tail Pipe Quantity |
2, Dual |
| Tail Pipe Tapered Outlet |
No, No |
| Tip Diameter |
2.500 in., 2.50 |
| Tip Diameter (in) |
2.5 |
| Tip Diameter (in.) |
2.5 |
| Tip Quantity |
2 |
| Tip Shape |
Round |
| Tip Size |
2.5 in. |
| Tube Diameter |
2.5 inch, 2.50 |
| Tubing Diameter |
2.500 in., 2.50 |
| Tubing Diameter (in) |
2.5 |
| Type |
Crossmember-back, Crossmember-back |
| Type of Exhaust |
Header-Back, Crossmember-back |
| Valve Included |
No, No |
| Valve Type |
Not Applicable, Not Applicable |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| GTIN |
00700042024308 |
