2009-2024* (*Classic body) RAM 1500 5.7L Hemi engine with Factory dual tailpipes. - Aggressive to moderate sound
"This Flowmaster® American Thunder® direct-fit muffler fits all 2009-2024* (*Classic body) RAM 1500 trucks equipped with the 5.7L Hemi and factory dual tailpipes. Features include full stainless steel construction, a 3.00-inch mandrel-bent inlet pipe flowing into a 50 Series HD™ muffler with large 4.00-inch internals and a built-in resonator helping keep the interior sound down to a minimum, while still delivering a deep moderate aggressive tone outside the vehicle. The system attaches to the factory hanger locations and includes all necessary hardware for a quick and easy installation that you can do at home. Covered by our Lifetime Limited Warranty.
- Includes Hangers and Hardware for Easy Installation
- Moderate/Aggressive Exterior Exhaust Tone
- Dyno Tuned for Maximum Performance
- 50HD Muffler with Built-in Resonator
- Uses the Factory Hanger Locations
- Stainless Steel Construction
- Lifetime Limited Warranty
- Flowmaster Quality
- Easy Installation
Information:
Does Not fit the 2019-2024 new body RAM 1500 trucks or trucks with factory single tailpipe.
Application Summary:
| Year |
Make/Model |
| 2009-2010 |
Dodge Ram 1500 |
| 2011-2018 |
Ram 1500 |
| 2019-2024 |
Ram 1500 Classic |
| Attributes |
| ASIN |
B0084C9VCO |
| Body Height |
5.00 |
| Body Height (in.) |
OEM |
| Body Length |
OEM, 18.00 |
| Body Length (in.) |
OEM |
| Body Material |
409 Stainless Steel |
| Body Width |
OEM, 10.00 |
| Body Width (in.) |
OEM |
| Brand |
Flowmaster, Flowmaster |
| Bullet Point #1 |
Stainless Steel Construction |
| Bullet Point #2 |
Moderate Sound exterior exhaust tone |
| Bullet Point #3 |
Includes hangers and hardware for easy installation |
| Bullet Point #4 |
Dyno tuned for maximum performance |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Category |
Exhaust, Exhaust |
| Clamping Type |
Flat Band |
| Clamps Included |
No, No |
| Country of Origin (Primary) |
US |
| Emission Code |
5, 5 |
| Exhaust Series |
American Thunder, American Thunder |
| Finish |
Natural |
| Gasket Or Seal Included |
No |
| Grade Type |
Performance |
| Hanger Included |
No, No |
| Harmonized Tariff Code (Schedule B) |
8708925000 |
| Hazardous Material Code |
N |
| Heat Shield |
No, No |
| Heat Shield Attached |
No, No |
| Heat Shield Included |
No |
| Inlet Connection Type |
Pipe Connection |
| Inlet Diameter |
3.000 in., 3.00 |
| Inlet Diameter (in) |
3 |
| Inlet Inside Diameter |
3.000 in., 3.00 |
| Inlet Inside Diameter (in.) |
3 |
| Inlet Location |
Offset, Offset |
| Inlet Outside Diameter |
3.000 in., 3.13 |
| Inlet Position |
Offset, Offset |
| Inlet Quantity |
1 |
| Inlet Size (in.) |
3 |
| Inlet Type |
Single Offset, Slip-Fit |
| Life Cycle Status Code |
Available to Order |
| Main Piping Diameter |
3.000 in., 3.00 |
| Main Piping Diameter (in.) |
3 |
| Material |
Stainless Steel, 409 Stainless Steel |
| Muffler Count |
1 |
| Muffler Material |
409 Stainless Steel |
| Muffler Quantity |
1, 1 |
| Muffler Series |
50 Series HD, 50 Series HD |
| Muffler Shape |
Oval |
| Muffler Type |
Chambered |
| NAFTA Preference Criterion Code |
B |
| Outlet Diameter |
2.500 in., 2.25 |
| Outlet Diameter (in) |
2.25 |
| Outlet Inside Diameter |
2.25 |
| Outlet Location |
Dual, Dual |
| Outlet Outside Diameter |
2.250 in., 2.38 |
| Outlet Outside Diameter (in.) |
2.25 |
| Outlet Position |
Dual, Dual |
| Outlet Quantity |
2 |
| Outlet Size (in.) |
2.25 |
| Outlet Type |
Dual Outlet, Slip-Fit |
| Overall Length |
OEM |
| Overall Length (in.) |
OEM |
| part type |
Exhaust Muffler Assembly, Exhaust Muffler Assembly |
| Position |
N/A |
| Product Type |
Exhaust Systems / Kits, Exhaust System |
| SDR Required Flag |
N |
| SDS Sheet Number |
N |
| Series |
American Thunder Exhaust Systems |
| Shape |
Oval |
| Sound Level |
Moderate, Aggressive / Moderate |
| Spring Bolt Kit Included |
No |
| Sub Category |
Mufflers, Mufflers |
| Subcategory |
Axle-Back Exhaust Kits |
| System Type |
D-Fit Muffler, Direct-Fit Muffler |
| Tubing Diameter |
3.00, 3.00 |
| Tubing Diameter (in) |
3 |
| Universal Or Specific Fit |
Universal |
| Warning |
California Proposition 65, California Proposition 65 |
| Warranty Time |
12 |
| GTIN |
00700042026210 |
